Ball and chain inactivation

- 18.49

Paradise Herbs, BlenderBottle, with Blender Ball, 20 oz Bottle ...
photo src: www.iherb.com

In neuroscience, ball and chain inactivation is a model to explain the fast inactivation mechanism of voltage-gated ion channels. The process is also called hinged-lid inactivation or N-type inactivation. A voltage-gated ion channel can be in three states: open, closed, or inactivated. The inactivated state is mainly achieved through fast inactivation, by which a channel transitions rapidly from an open to an inactivated state. The model proposes that the inactivated state, which is stable and non-conducting, is caused by the physical blockage of the pore. The blockage is caused by a "ball" of amino acids connected to the main protein by a string of residues on the cytoplasmic side of the membrane. The ball enters the open channel and binds to the hydrophobic inner vestibule within the channel. This blockage causes inactivation of the channel by stopping the flow of ions. This phenomenon has mainly been studied in potassium channels and sodium channels.


Xtreme Pumpz Shaker Cup | Xtreme Pumpz | Best Pre Workout ...
photo src: xtremepumpz.com


Maps, Directions, and Place Reviews



Discovery

Electrophysiological evidence

The initial evidence for a ball and chain inactivation came in 1977 with Clay Armstrong and Francisco Bezanilla's work. The suggestion of a physical basis for non-conductance came from experiments in squid giant axons, showing that internal treatment with pronase disrupted the inactivation phenomenon. This suggested a physical, tethered mechanism for inactivation as the pronase was inferred to degrade the channel blocker and abolish the inactivation process. These experiments also showed that inactivation can only occur after the opening of the channel. This was done by hyperpolarising the membrane, causing the channel to open, and observing a delay in inactivation. Inactivation was not observed when the membrane was depolarised (closed). Introducing tetraethylammonium (TEA) on the intracellular side of the channel was found to mimic inactivation in non-inactivating channels. Blockage of the channel by TEA is mutually exclusive with peptide-mediate blockage, suggesting that TEA competes for an inactivation binding site.

Molecular evidence

Mutagenesis experiments have identified an intracellular string of amino acids as prime candidates for the pore blocker. The precise sequence of amino acids that makes up the channel-blocking ball in potassium channels was identified through the creation a synthetic peptide. The peptide was built based on the sequence of a 20 amino acid residue from the Drosophila melanogaster 's Shaker ShB protein and applied on the intracellular side of a non-inactivating channel in Xenopus oocytes. The peptide restored inactivation to the channel, giving further support to the ball and chain model. In ?2 proteins, the first three residues after the initial methionine have been identified as essential for inactivation. The initial residues have a sequence motif of phenylalanine, isoleucine and tryptophan without which inactivation does not occur. Modifying the subsequent residues alters the speed and efficacy of inactivation without abolishing it.

Structural evidence

More recently, nuclear magnetic resonance studies in Xenopus oocyte BK channels have shed further light on the structural properties of the ball and chain domain. The introduction of the KCNMB2 ? subunit to the cytoplasmic side of a non-inactivating channel restored inactivation, conforming to the expected behaviour of a ball and chain-type protein. NMR analysis showed that the ball domain is composed of residues 1-17 and the chain region of residues 20-45. The three amino acids in the middle constitute a flexible linker region between the two functional regions. The ball is at the N-terminus of the ? subunit and consists of a disordered part (residues 1-10) and a loop-helix motif formed by a block of amino acids spanning from serine at position 11 to aspartate at position 16. The structure of the chain domain is 4-turn alpha helix structure.


Protein Shaker With Ball Video



Structure

The ball and chain domains are on the cytoplasmic side of the channel. The most precise structural studies have been carried out in Shaker potassium channels, in which the precise residues involved in the process have been identified. The first 19 amino acids of the N-terminus constitute the ball domain. This is made up of 11 hydrophobic amino acids, 8 hydrophilic ones and 4 positively charged ones. The following 60 amino acids constitute the chain domain. Modifying the amino acids of the ball while preserving their chemical properties does not disrupt the inactivation mechanism. This suggests that the ball occludes the channel by binding electrostatically rather than covalently. Structural studies have shown that the inner pore of the potassium channel is accessible only through side slits between the cytoplasmic domains of the four ?-subunits, rather than from a central route as previously thought. The ball domain enters the channel through the side slits and attaches to a binding site deep in the central cavity. This process involves a conformational change, which allows the ball and chain blocker to elongate and reach the inner center of the channel.

A positively charged region between the III and IV domains of sodium channels is thought to act in a similar way. The essential region for inactivation in sodium channels is four amino acid sequence made up of isoleucine, phenylalanine, methionine and threonine (IFMT). The T and F interact directly with the docking site in the channel pore. When voltage-gated sodium channels open, the S4 segment moves outwards from the channel and into the extracellular side. This exposes hydrophobic residues in the S4 and S5 segments which interact with the inactivation ball. The phenylalanine of the ball interacts with the alanine in domain III's S4-S5 segments and the asparagine in domain IV's S4-S5 segments. This explains why inactivation can only occur once the channel is open.

Lateral slits are also present in sodium channels, suggesting that the access route for the ball domain may be similar.

There is a distinction between direct inactivation and two-step inactivation. Direct inactivation, which occurs in Shaker potassium channels results from the direct blockage of the channel by the ball protein, while two-step inactivation, thought to occur in BK channels, requires an intermediate binding step.

Inactivation prevention domain

Potassium channels have an additional feature in the N-terminus which makes the channels unable to inactivate. The N-type inactivation-prevention (NIP) domain counteracts the effect of the peptide ball. Channels containing the NIP domain behave as mutated non-inactivating channels, as they have no inactivation activity. The effect is thought be stoichiometric, as the gradual introduction of un-tethered synthetic balls to the cytoplasm eventually restores inactivation.


Stainless Steel Blender Ball for Jars | Tiffins 'N Things ...
photo src: www.tiffinsandthings.com


Effects on neuronal firing

The interplay between opening and inactivation controls the firing pattern of a neuron by changing the rate and amount of ion flow though the channels. Voltage-gated ion channels open upon depolarization of the cell membrane. This creates a current caused by the flow of ions through the channel. Shortly after opening, the channel is blocked by the peptide ball. When the membrane repolarises, the ball is expelled from the channel. This causes a resurgent current: a flow of ions between inactivation and closure of the channel. In sodium channels this process is modulated by ? subunits. The ?1 subunit aids recovery from inactivation, while ?2 accelerates inactivation. The ? subunits can also interfere with ball and chain domains by blocking their entry into the channel. This leads to persistent currents, caused by the continued influx of ions. The ?3 subunit can increase persistent current in certain sodium channels.

Implications for disease

Differences in persistent and resurgent currents have been implicated in certain human neurological and neuromuscular disorders. In epilepsy, mutations in sodium channels genes delay inactivation. This leads to the channel staying open for longer and thus longer-lasting neuronal firing. Higher levels of persistent current are observed in epilepsy. This constant, low-level neuronal stimulation has been linked to the seizures typical of this disorder.

Inactivation anomalies have also been linked to Brugada syndrome. Mutations in genes encoding the ? subunit in cardiac sodium channels affect inactivation. These increase persistent current by interfering with inactivation, though different mutations have opposite effects in inactivation speed.

Mutations in the ? subunit of skeletal muscles are also associated with myotonia. The characteristic muscular hyperexcitation of mytonia is mainly caused by the presence sodium channels which do not inactivate, causing high levels of persistent current in the muscles.

Source of the article : Wikipedia



EmoticonEmoticon

 

Start typing and press Enter to search